Support for Windows Products
Support for Windows Products
How To Fix Error Ide Channel
If you have Error Ide Channel then we strongly recommend that you download and run this (Error Ide Channel) repair tool.
Symptoms & Summary
Error Ide Channel and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes. There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on.
In order to fix your error, it is recommended that you download the 'Error Ide Channel Repair Tool'. This is an advanced optimization tool that can repair all the problems that are slowing your computer down. You will also dramatically improve the speed of your machine when you address all the problems just mentioned.
Recommended: In order to repair your system and Error Ide Channel, download and run Reimage. This repair tool will locate, identify, and fix thousands of Windows errors. Your computer should also run faster and smoother after using this software.
File Size 746 KB
Compatible Windows XP, Vista, 7 (32/64 bit), 8 (32/64 bit), 8.1 (32/64 bit) Windows 10 (32/64 bit)
Gaming Smartphones Tablets Windows 8 PSUs Android Your question Get the answer Tom's Hardware>Forum>Storage>Primary IDE channel no 80 conductor cable installed> Primary
IDE channel no 80 conductor cable installed Tags: Hard Drives Cable ide channel 0 no 80 conductor cable installed Storage Last response: 5 February 2005 10:10 in Storage Share Anonymous a b G Storage 3
February 2005 16:19:51 Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?) My computer has suddenly started reporting the error message "Primary IDE channel no 80 conductor cable installed" after ide channel driver the BIOS has detected the harddrives connected to my system. I have the following configuration: Primary Master: West Digital 80GB ATA100 Primary Slave: DVD Writer Secondary Master: Seagate 180GB ATA100 Secondary Slave: DVD ROM The system boots using the following: Primary Master: UDMA33 Primary Slave: UDMA33 Secondary Master: UDMA100 Secondary Slave: UDMA33 I have tried primary ide channel disconnecting the DVD Writer on the Primary Slave, but that makes no difference. I have tried a brand new 80 pin cable for the Primary channel, but that makes no difference. I have tried putting the Western Digital HD on the known working secondary Master connection, but that makes no difference. Could this be a problem with the hard disk itself? The harddisk runs perfectly ok and reports no SMART errors or anything like that, but just runs slower than it could. Thanks, Matt --- Remove SPAM trap if replying by email. More about : primary ide channel conductor cable installed Anonymous a b G Storage 4 February 2005 06:40:55 Archived from groups: comp.sys.ibm.pc.hardware.storage (More info?)
& more! END TEMPLATE: footer 8} Google search VB search Search Home Forums News
Forum Latest Industry News Community News & Polls AVS Forum on chip ide channel Podcasts Great Found Deals AVS Forum Clubs Special Forums Rumor Mill AVS Forum Gold Coffee House
Display Devices Digital Projectors - Under $3,000 USD MSRP LCD Flat Panel Displays Plasma Flat Panel Displays Digital Hi-End Projectors - $3,000+ USD MSRP Rear Projection http://www.tomshardware.com/forum/140562-32-primary-channel-conductor-cable-installed Units OLED Technology & Flat Panels General Ultra Hi-End HT Gear ($20,000+) High dynamic Range (HDR) & Wide Color Gamut (WCG) Screens Direct View (single tube) CRT Displays Display Calibration 2.35:1 Constant Image Height Chat HDTV Local HDTV Info and Reception HDTV Technical HDTV Programming HDTV Recorders Audio Speakers Headphones Receivers, Amps http://www.avsforum.com/forum/26-home-theater-computers/1215760-areca-channel-reading-error.html and Processors Subwoofers, Bass and Transducers DIY Speakers and Subs Soundbars CD Players & Dedicated Music Transports Home Theater in a Box Surround Music Formats 2 Channel Audio Audio theory, setup and chat Blu-ray & HD DVD Official AVS Forum Blu-ray Disc Reviews Blu-Ray Players Blu-Ray Software Dual Format Players HDTV Software Media Discussion HD DVD Players HD DVD Software Gaming & Content Streaming Network, Media Servers and Content Streaming Home Theater Gaming Digital Recorders (PVRs) General XM and Sirius Satellite Radio HD Radio Portable A/V ReplayTV & ShowStopper PVRs Microsoft UltimateTV PVR Video Components Video Download Services & Hardware DVD Players (Standard Def) DVD Recorders (Standard Def) Cable, Digital Cable (non-HDTV) Video Processors Home Theater Computers Home Entertainment & Theater Builder Dedicated Theater Design and Construction General Home Theather & Media/Game Rooms Theater Room Items & Accessories Game Room Equipment & Accessories Outdoor Theaters 3D Central 3D Tech Talk 3D Displays 3D Sour
we highly recommend that you visit our Guide for New Members. Solved: error primary IDE channel no 80 conductor cable installed Discussion in 'Hardware' started by rubeckf, Jun 23, 2005. Thread Status: Not open for further https://forums.techguy.org/threads/solved-error-primary-ide-channel-no-80-conductor-cable-installed.374528/ replies. Advertisement rubeckf Thread Starter Joined: Jul 1, 2003 Messages: 755 Suddenly I'm getting this message http://arstechnica.com/civis/viewtopic.php?t=942847 on my older computer when I try to boot up. It was working and then it hung up. I turned it off with the switch and now it won't boot up past this error. What could be the cause & the fix? rubeckf, Jun 23, 2005 #1 Sponsor Triple6 Rob Moderator Joined: Dec 26, 2002 Messages: 49,259 Try replacing the primary ide channel IDE cable with a new 80 wire cable. Thats where I'd start. Triple6, Jun 23, 2005 #2 rubeckf Thread Starter Joined: Jul 1, 2003 Messages: 755 I put a new IDE cable in and now here's what's happening. It recognizes the HD, CD &CD burner & then it stops. I can get in the BIOS, but it won't let me do the F5 or F6 only F10 to save. I can make changes in the BIOS though. It ide channel 0 won't let me boot with a floppy or a CD either. What could have happened so suddenly? I also got the MB manual and cleared the CMOS just in case. rubeckf, Jun 23, 2005 #3 lehatche Joined: Jul 26, 2004 Messages: 668 What size PSU do you have? Try unpluging the CD or the burner and see if it still does the same. lehatche, Jun 23, 2005 #4 rubeckf Thread Starter Joined: Jul 1, 2003 Messages: 755 I don't know the size of the psu off hand and I didn't take the computer completely open to remove the cable. I just reached in and did it from the side with eveything off. I have had this one for about 5 yrs and have upgraded the BIOS and processor 6 or 8 months ago. I removed the cable from the burner and now I get this message before it sticks...sec. slave drive-ATAPI incompatible. Press F1 to continue and then it won't let me continue any further. rubeckf, Jun 23, 2005 #5 SacsTC Joined: Dec 30, 2003 Messages: 1,647 Dead Hard Drive. Try it in another computer, but this is an error message ECS mobo gives when HD fails. SacsTC, Jun 23, 2005 #6 rubeckf Thread Starter Joined: Jul 1, 2003 Messages: 755 It recognized the HD after I changed cables though. It still recognizes the HD, CDROM. Why would it recognize i
Cooling Fetish CPU & Motherboard Technologia Mobile Computing Outpost Networking Matrix Other Hardware Agora Classifieds Ars DIY Forum (Name TBD!) Operating Systems & Software Battlefront Microsoft OS & Software Colloquium Linux Kung Fu Windows Technical Mojo Distributed Computing Arcana Macintoshian Achaia Programmer's Symposium The Server Room Ars Lykaion Gaming, Extra Strength Caplets The Lounge The Soap Box The Boardroom The Observatory Ars Help & Feedback Ars Subscription Member Areas Image Galleries BIOS says that Hard Disk's S.M.A.R.T. status is bad. Can anyone explain that to me ?? 15 posts Doomguy Ars Scholae Palatinae Registered: Jun 30, 2000Posts: 839 Posted: Thu Aug 16, 2001 3:36 am System Specs----------------Inter 440LX motherboard with Award BIOS.Celeron 466 MhzUsing onboard IDE channels and NO SCSI devices.OS : Windows 2000 and Windows XP. There are some NTFS and some FAT32 partitions. I don't think that could affect the problem, but then I don't know much about "S.M.A.R.T.".The IDE Config.--------------------IDE0 Master : 6.2 GB Seagate Hard Disk IDE0 Slave : HP 8250i CDRWIDE1 Master : 17 GB Seagate Hard DiskIDE1 Slave : Creative PCDVD2 driveWhen I boot, my BIOS is now saying (started just today morning)that "IDE1 Master S.M.A.R.T. is BAD. Backup and Replace." During booting, the BIOS displays the system devices on the screen (only for a moment) and for all these months the hard disks were reported as "S.M.A.R.T. capable and enabled".I had read that SMART is a feature which predicts impending hard disk failures. So I have already backed up all my data from the 17 GB drive to another computer. My question is that the drive still works as usual, so how long before I come across some problems ?Also, does this mean that the drive will go 100% bad after some time or can I still use it then (maybe with bad sectors or after a full format) ?I'm quite surprisNo related pages.
There are many reasons why Error Ide Channel happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors. Reimage specializes in Windows repair. It scans and diagnoses, then repairs, your damaged PC with technology that not only fixes your Windows Operating System, but also reverses the damage already done with a full database of replacement files.
A FREE Scan (approx. 5 minutes) into your PC's Windows Operating System detects problems divided into 3 categories - Hardware, Security and Stability. At the end of the scan, you can review your PC's Hardware, Security and Stability in comparison with a worldwide average. You can review a summary of the problems detected during your scan. Will Reimage fix my Error Ide Channel problem? There's no way to tell without running the program. The state of people's computers varies wildly, depending on the different specs and software they're running, so even if reimage could fix Error Ide Channel on one machine doesn't necessarily mean it will fix it on all machines. Thankfully it only takes minutes to run a scan and see what issues Reimage can detect and fix.
A Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed. When you have an error in Windows, it may be critical and cause your programs to freeze and crash or it may be seemingly harmless yet annoying.
A stop error screen or bug check screen, commonly called a blue screen of death (also known as a BSoD, bluescreen), is caused by a fatal system error and is the error screen displayed by the Microsoft Windows family of operating systems upon encountering a critical error, of a non-recoverable nature, that causes the system to "crash".
One of the biggest causes of DLL's becoming corrupt/damaged is the practice of constantly installing and uninstalling programs. This often means that DLL's will get overwritten by newer versions when a new program is installed, for example. This causes problems for those applications and programs that still need the old version to operate. Thus, the program begins to malfunction and crash.
Computer hanging or freezing occurs when either a program or the whole system ceases to respond to inputs. In the most commonly encountered scenario, a program freezes and all windows belonging to the frozen program become static. Almost always, the only way to recover from a system freeze is to reboot the machine, usually by power cycling with an on/off or reset button.
Once your computer has been infected with a virus, it's no longer the same. After removing it with your anti-virus software, you're often left with lingering side-effects. Technically, your computer might no longer be infected, but that doesn't mean it's error-free. Even simply removing a virus can actually harm your system.
Reimage repairs and replaces all critical Windows system files needed to run and restart correctly, without harming your user data. Reimage also restores compromised system settings and registry values to their default Microsoft settings. You may always return your system to its pre-repair condition.
Reimage patented technology, is the only PC Repair program of its kind that actually reverses the damage done to your operating system. The online database is comprised of over 25,000,000 updated essential components that will replace any damaged or missing file on a Windows operating system with a healthy version of the file so that your PC's performance, stability & security will be restored and even improve. The repair will deactivate then quarantine all Malware found then remove virus damage. All System Files, DLLs, and Registry Keys that have been corrupted or damaged will be replaced with new healthy files from our continuously updated online database.
Downloads in July: 361,927
Download Size: 746KB
To Fix (Error Ide Channel) you need to follow the steps below:
Download Error Ide Channel Repair Tool
Click the "Scan" button
Click 'Fix All' and the repair is complete.
Windows Operating Systems:
Compatible with Windows XP, Vista, Windows 7 (32 and 64 bit), Windows 8 & 8.1 (32 and 64 bit), Windows 10 (32/64 bit).