Support for Windows Products
Support for Windows Products
How To Fix Error 4156
If you have Error 4156 then we strongly recommend that you download and run this (Error 4156) repair tool.
Symptoms & Summary
Error 4156 and other critical errors can occur when your Windows operating system becomes corrupted. Opening programs will be slower and response times will lag. When you have multiple applications running, you may experience crashes and freezes. There can be numerous causes of this error including excessive startup entries, registry errors, hardware/RAM decline, fragmented files, unnecessary or redundant program installations and so on.
In order to fix your error, it is recommended that you download the 'Error 4156 Repair Tool'. This is an advanced optimization tool that can repair all the problems that are slowing your computer down. You will also dramatically improve the speed of your machine when you address all the problems just mentioned.
Recommended: In order to repair your system and Error 4156, download and run Reimage. This repair tool will locate, identify, and fix thousands of Windows errors. Your computer should also run faster and smoother after using this software.
File Size 746 KB
Compatible Windows XP, Vista, 7 (32/64 bit), 8 (32/64 bit), 8.1 (32/64 bit) Windows 10 (32/64 bit)
logged intermittently when MSDTC Mutual Authentication is not required ★★★★★★★★★★★★★★★ davidqiuNovember 5, 20095 0 0 0 SYMPTOMS Intermittently MSDTC 4156 error message with RPC_S_INVALIDA_ARG in the event details is logged in the event log when MSDTC is configured with Mutual Authentication not required. Event Type: Error Event Source: MSDTC Event Category: CM Event ID: 4156 Date: 10/29/2009 Time: 4:22:02 PM User: N/A Computer: ********* Description: String message: RPC raised an exception with a return code RPC_S_INVALIDA_ARG. ENVIRONMENT Windows 2003 Service Pack 1 and above. CAUSE The 4156 event typically happens when a session from a DTC to its partner DTC is getting established. The code always attempts to bind using Mutual Authentication to establish a secure session. If secure negotiation fails it will try unsecure binding if Mutual Authentication is not required. The attempt to try Mutual Authentication generates the 4156 event, however the immediate unsecure retry succeeds. If you enable CM tracing, the CM Trace files reflect this behavior as follows: 10-29-2009 16:22 02:920: CM Error Value = 0x000006d2, Received Unauthenticated Rpc Call, d:\nt\com\complus\dtc\dtc\cm\src\iomgrsrv.cpp (704) 10-29-2009 16:22 02:951: CM Error Value = 0x00000057, Call to RpcBindingSetAuthInfoEx failed, d:\nt\com\complus\dtc\dtc\cm\src\iomgrclt.cpp (543) 10-29-2009 16:22 02:966: CM Error Value = 0x80070057, Call to SetRpcSecurity failed, d:\nt\com\complus\dtc\dtc\cm\src\iomgrclt.cpp (570) 10-29-2009 16:22 02:966: CM Error Value = 0x80070057, SecureBuildContextWrapper call failed. This is usually due to security/network configuration issues., d:\nt\com\complus\dtc\dtc\cm\src\iomgrclt.cpp (329) Add the following Registry Value to enable CM Tracing: Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC Name: TraceCMErr Type: REG_DWORD Value: 1 - Tracing enabled Default Value: 0 - Tracing disabled Restart MSDTC service for tracing to be enabled and collect the files from the "C:\Documents and Settings\NetworkServ
to the analysis by Registry Easy : error 4156: Detected! Speed point: , Errors: , Safety:LOW, Health Degree: , Overall point: . error 4156 is critical system error caused by corrupt and missing registry data. This error should be fixed immediately to prevent further damage to the Windows file system. Whether you have encountered the troubles that 99.47% of computer users have? Has your PC encountered malicious ads procedures, Trojans or viruses?Has your PC had errors like .DLL, .EXE etc Want your computer to play 100% performance?Want your computer to be more secure and your privacy and history won't be https://blogs.msdn.microsoft.com/distributedservices/2009/11/05/event-id-4156-with-rpc_s_invalida_arg-is-logged-intermittently-when-msdtc-mutual-authentication-is-not-required/ known by others?Want your PC to continue running 72 hours without feeling of slow speed? Want to fully release hard disk space and system resources? How to Fix error 4156 in one Minute Download error 4156 Repair Tool for Free Congratulations! Now you only need 2 minutes to fix error 4156 and all annoying problems mentioned above will be effectively resolved -- Very Easy! Registry Easy is a Microsoft Windows tool http://www.kswdsearch.com/error-error%204156 that will fix error 4156 by analyzing your registry for missing, obsolete, and corrupt entries resulting from failed installations, incomplete un-installations, disabled drivers, and spyware applications. It is 100% FREE to download. Repair error 4156, Optimize & Speed Up Your PC In Minutes. Registry Easy is a kind of computer optimization software with new concept and multi-function. It has the world's leading technology to scan the computer problems as 2.7 times as the similar products. Effectively repair error 4156 and the majority of your PC's errors and let it be 100% healthy. Comprehensively enhance all aspects of your computer. Optimize your PC and bring its potential performance into 100% full play. Clean up your PC's junk files and 56 kinds of history. Effectively protect your PC and avoid ads procedures, malicious code and Trojans. The most important thing is - you just need One-Click! Use our unique "One-Click operation" function then you can easily use its powerful functions even if you know nothing about computer! How Well Does Registry Easy Work? Media & Press REVIEW:More than 99.4% of computers have problems like blue screen, freeze up, deadlock and others according to the feedback from the computer users. They start to search registry cleaner as their Registry Eas
Favorite Rating: Passwords not syncing from AD - Error: [PWD 4156] AddDCKey() domain controller ad.domain.com is not in listThis document (7017146) is provided subject to the disclaimer at the end of this document. Environment https://www.novell.com/support/kb/doc.php?id=7017146 NetIQ Identity Manager 4.5NetIQ Identity Manager 4.0.2NetIQ Identity Manager Driver - Active DirectoryNsure Identity Manager 2.0 Situation Problem synchronizing passwords from Active Directory to eDirectory. After configuring the remote loader for a trace level 5, you see https://www.veritas.com/support/en_US/article.000108198 the following error in the log:Error: AddDCKey() domain controller dc.domain.com is not in list DirXML: [12/22/15 14:41:49.32]: ADDriver: [PWD] - AddDCKey() domain controller WIN.ad.domain.com is not in listDirXML: [12/22/15 14:41:49.32]: ADDriver: [PWD 4156] sPDCName = WIN.ad.domain.comDirXML: [12/22/15 error 4156 14:42:01.38]: ADDriver: [PWD] - AddDCKey() domain controller AD01.ad.domain.com is not in listDirXML: [12/22/15 14:42:01.38]: ADDriver: [PWD 4156] sPDCName = WIN.ad.domain.com Resolution 1. Make sure you have applied successfully the current engine & remote loader patches for the IDM engine and remote loader you are running from dl.netiq.com2. Make sure you are running the current Active Directory Driver from dl.netiq.com 3. If this didn't fix the issue, check the way you are authenticating to the error 4156 domain. Set your authentication ID to "Administrator", put in the password of the Administrator in the application password fields, and make sure you've chosen"Negotiate" as the Authentication Method. **** IMPORTANT: We have seen this error when you specify SIMPLE as the authentication method. Verify it is set to Negotiate **** 4. Restart the remote loader and / or the domain controllers running the domain. This will refresh the list of domain controllers in the domain for the remote loader. At a minimum, restart the domain controller running the remote loader and the domain controller server running the password filter listed in the error.5. Review the DNS configuration of the machine where the driver is running. Make sure you can resolve the name of the domain controllers and that the DNS server that is servicing the domain is listed in the DNS servers list for the LAN Interface of the server (listed on the properties of the TCP/IP Protocol configuration for the LAN card). 6. Launch the password sync control panel applet, select the domain, and view the list of servers in the domain. Does the server in the error show up in the list? It should. Cause When the remote loader starts up it does a query to find out what servers are in the domain. This list is us
SERVICES Services Overview Education Services Business Critical Services Consulting Services Managed Services Appliance Services CUSTOMER CENTER Customer Center Support Community MyVeritas Customer Success Licensing Programs Licensing Process ABOUT About Corporate Profile Corporate Leadership Newsroom Research Exchange Investor Relations Careers Legal Contact Us English 中文(简体) English Français Deutsch Italiano 日本語 한국어 Português Español USA Site: Veritas Veritas PartnerNet "VxVM ERROR V-5-2-4156 Can't find correct device for label" appears while trying to encapsulate a root disk configured for booting from the SAN Article:000108198 Publish: Article URL:http://www.veritas.com/docs/000108198 Support / Article Sign In Remember me Forgot Password? Don't have a Veritas Account? Create a Veritas Account now! Welcome First Last Your Profile Logout Sign in to Subscribe Please sign in to set up your subscription. Close Sign In Print Article Products Related Articles Article Languages Subscribe to this Article Manage your Subscriptions Problem "VxVM ERROR V-5-2-4156 Can't find correct device for label" appears while trying to encapsulate a root disk configured for booting from the SAN. Error Message VxVM vxencap INFO V-5-2-1923 Encapsulating root diskVxVM ERROR V-5-2-4156 Can't find correct device for label Cause The Linux Device Mapper Multipathing is not compatible with Veritas DMP (Dynamic Multipathing). Solution Remove the root disk from the Linux Device Mapper Multipathing before attempting to encapsulate the disk. Additional notes It may be necessary to remove the Linux Multipathing utility package and rebuild initrd. Check with your OS vendor for assistance.Ensure that /etc/fstab uses the device name in the format /dev/sdXn rather than the UUID for root and swap. Modify it, if needed, prior to rebooting.If the message "V-5-2-6420 Missing entry for root disk" appears, try to regenerate /boot/grub/device.map by running the GRUB command below before encapsulating # grub-install --recheck
There are many reasons why Error 4156 happen, including having malware, spyware, or programs not installing properly. You can have all kinds of system conflicts, registry errors, and Active X errors. Reimage specializes in Windows repair. It scans and diagnoses, then repairs, your damaged PC with technology that not only fixes your Windows Operating System, but also reverses the damage already done with a full database of replacement files.
A FREE Scan (approx. 5 minutes) into your PC's Windows Operating System detects problems divided into 3 categories - Hardware, Security and Stability. At the end of the scan, you can review your PC's Hardware, Security and Stability in comparison with a worldwide average. You can review a summary of the problems detected during your scan. Will Reimage fix my Error 4156 problem? There's no way to tell without running the program. The state of people's computers varies wildly, depending on the different specs and software they're running, so even if reimage could fix Error 4156 on one machine doesn't necessarily mean it will fix it on all machines. Thankfully it only takes minutes to run a scan and see what issues Reimage can detect and fix.
A Windows error is an error that happens when an unexpected condition occurs or when a desired operation has failed. When you have an error in Windows, it may be critical and cause your programs to freeze and crash or it may be seemingly harmless yet annoying.
A stop error screen or bug check screen, commonly called a blue screen of death (also known as a BSoD, bluescreen), is caused by a fatal system error and is the error screen displayed by the Microsoft Windows family of operating systems upon encountering a critical error, of a non-recoverable nature, that causes the system to "crash".
One of the biggest causes of DLL's becoming corrupt/damaged is the practice of constantly installing and uninstalling programs. This often means that DLL's will get overwritten by newer versions when a new program is installed, for example. This causes problems for those applications and programs that still need the old version to operate. Thus, the program begins to malfunction and crash.
Computer hanging or freezing occurs when either a program or the whole system ceases to respond to inputs. In the most commonly encountered scenario, a program freezes and all windows belonging to the frozen program become static. Almost always, the only way to recover from a system freeze is to reboot the machine, usually by power cycling with an on/off or reset button.
Once your computer has been infected with a virus, it's no longer the same. After removing it with your anti-virus software, you're often left with lingering side-effects. Technically, your computer might no longer be infected, but that doesn't mean it's error-free. Even simply removing a virus can actually harm your system.
Reimage repairs and replaces all critical Windows system files needed to run and restart correctly, without harming your user data. Reimage also restores compromised system settings and registry values to their default Microsoft settings. You may always return your system to its pre-repair condition.
Reimage patented technology, is the only PC Repair program of its kind that actually reverses the damage done to your operating system. The online database is comprised of over 25,000,000 updated essential components that will replace any damaged or missing file on a Windows operating system with a healthy version of the file so that your PC's performance, stability & security will be restored and even improve. The repair will deactivate then quarantine all Malware found then remove virus damage. All System Files, DLLs, and Registry Keys that have been corrupted or damaged will be replaced with new healthy files from our continuously updated online database.
Downloads in February: 361,927
Download Size: 746KB
To Fix (Error 4156) you need to follow the steps below:
Download Error 4156 Repair Tool
Click the "Scan" button
Click 'Fix All' and the repair is complete.
Windows Operating Systems:
Compatible with Windows XP, Vista, Windows 7 (32 and 64 bit), Windows 8 & 8.1 (32 and 64 bit), Windows 10 (32/64 bit).